International Conference on COMPUTATIONAL MODELLING OF NANOSTRUCTURED MATERIALS ICCMNM - 2013 September 3 - 6, 2013,Frankfurt am Main, Germany


International Conference on COMPUTATIONAL MODELLING OF NANOSTRUCTURED MATERIALS ICCMNM - 2013 September 3 - 6, 2013,Frankfurt am Main, Germany

EU and Russian scientists join efforts in development
new nanomaterials
for medical implants

       With the ageing of European population, more and more people find themselves in need of dental or bone implants, which should help them to continue normal life even after mechanical damage or medical operations. The implants should remain functional over dozens of years without any deformation, and also without producing any toxic substances in the body. Titanium is a rather strong material, with high biocompatibility, and is therefore one of the most promising for medical implants in trauma surgery, orthopedic and oral medicine.
         However, dental and bone implant are subject to the very high loads. That is why even higher strength and damage resistances that those of common titanium are required to ensure the necessary service properties.
The very promising way to improve the implant materials and to ensure the required properties lies in nanotechnology. Applying the severe plastic deformation to metals, one can obtain new materials with very small grains (so-called ultrafine grained metals), which have also superior properties. These nanostructured materials are stronger and also more durable than common metals, and thus, they are very promising for the implant applications.
In order to develop nanostructured materials for medical implants, which correspond exactly to the service requirements, scientists and developers use typically computational models. To develop these models and software, a group of European and Russian scientists joined their efforts in two coordinated projects, funded by European Commission (Framework 7 Program) and Russian Ministry of Education and Science. The research project “Virtual Nanotitanium” has been started in 2011. Research groups from Denmark (coordinator), Belgium, Germany, Spain, Czech Republic and Israel as well as 6 groups from Russia participate in the project, covering different aspects of the development and computational modeling of nanomaterials.
During the project, several new technologies, computational models and prototypes have been developed.
A software complex for multiscale virtual testing of nanotitanium for the strength, usability in biomaterials and lack of toxic materials has been developed. This software can be then used by companies developing the new implants and materials, to optimize the materials and technologies.
A novel processing route for fabrication of nano-titanium, based on high temperature ECAP-C processing and drawing, was developed by Russian partner, Ufa State Aviation Technical University.
        One practical result is the development, fabrication and testing of new nanotitanium based implants with lower diameter, which can withstand loads similar to those carried by implants of conventional design with a 50% larger diameter made from coarse-grained Ti. Since the implant is made from pure Ti, it does not contain any toxic alloying elements or allergens. The prototype was developed by the Czech project partner, small company Timplant.
       In the framework of the project, a special issue of the international journal “Computational Materials Science” was published, and an International Conference on Computational Modelling of Nanostructured Materials is organized in Frankfurt am Main, Germany.

        The coordinator of the project, Senior Researcher, Dr. Leon Mishnaevsky Jr. (Technical University of Denmark) noted that the application of developed computational models would allow efficient, reliable and quick development of nanomaterials for medical implants, thus, minimizing the necessity in animal tests. Further, the new developed tools and technologies will open new possibilities in trauma surgery, orthopedic and oral medicine, with possibilities of healing bone illnesses, dental problems, and traumas at the new level.
        The coordinator of the Russian project, Professor Evgeny Levashov (National University of Science and Technology "MISIS", Moscow) underlined that this work is a very positive example of collaboration between European and Russian research teams, leading to the excellent new results.
        The Technical Advisor of the project, Professor Eberhard Seitz (Clausthal University of Technology, Germany) noticed that the main results of this project are the developed software for the optimization of nanomaterials for implants and the small radius implant will surely attract interest of industries.

        The project participants agreed to sign the memorandum of understanding lying ground for future collaboration and project continuation. In the Memorandum, the partners “agree agree to continue scientific, technical and practical collaboration in the area of the project” and related areas, among them, other nanostructured materials, their computational modeling and virtual testing of nanostructured materials.


    Dr. habil. Leon Mishnaevsky Jr.
Senior Scientist, Coordinator of EU FP7 project "Virtual Nanotitanium"
Address: Technical University of Denmark, Department of Wind Energy,
Riso Campus, Frederiksborgvej 399 DK-4000 Roskilde, Denmark

Back to the list